AS1528.1 Sanitary Tubes
SKU: N/A
Marking
Each tube shall be legibly and indelibly marked, either on the tube or on a label or wrapping which shall be securely attached with the following information:
a) the manufacturer’s name or identification mark;
b) the number of this British Standard, i.e. BS 4825-12);
c) the outside diameter and thickness;
d) material grade;
e) cast or batch reference to identify the source of the material.
Each tube shall be legibly and indelibly marked, either on the tube or on a label or wrapping which shall be securely attached with the following information:
a) the manufacturer’s name or identification mark;
b) the number of this British Standard, i.e. BS 4825-12);
c) the outside diameter and thickness;
d) material grade;
e) cast or batch reference to identify the source of the material.
Example
XYZ BS 4825/1 25.4 1.6 304S14 A1234
***NOTE The purchaser should specify in his enquiry and/or order whether permanent continuous marking is required
Ordering:
Information to be supplied by the purchaser
● Materials and manufacture
● Dimensions
● Tolerances
● Surface finish
● Manufacturer’s certificate
● Marking
Size Range
1″-6″
Material
304/316L
Surface Treatment
Matt/Matt 0.8μm/0.8μm
Standard
3A, ASTM, ASME
